REPLACEMENT 12 volt – Solar/Battery Operated Charging Unit ONLY
Model MAG12SP-UO

Do you have an older out of warranty Parmak 12 volt solar fence charger that you would like to update?

• Replacement unit ONLY for Parmak model MAG12-SP volt solar fence chargers.
• Will fit inside all Magnum 12SP battery cases
• Must be used as a replacement unit – No weather strip provided
• Battery wire connectors included
• Charges up to 30 miles of fence
• UL Listed

To replace the fence charging unit:

• Simply remove the solar panel lid
• Remove the internal battery
• Remove unit battery case screws (top left and top right on the battery case), and remove old unit from the battery case.
• Disconnect wires the red and black wires from the battery and the solar panel.
• Connect the new charging unit wires to the solar panel wires using the new splicing clamps (red wire to red wire and black wire to black wire).
• Place the new unit in the the battery case and secure with the two case screws.
• Reconnect the battery to the solar panel wires.
• Turn the fence charger switch on and check performance meter on the fence charger for proper operation.
• If proper operation, turn off fence charger and re-install battery into the case and re-attach the solar panel lid.